oops wrong place. sorry for the double post folks. Mean't for the "banned ones".

That's not a bug so much as basic Q3A behavior -- it doesn't have a weighted weapon system in the way Quake and QW did. For now, I'd recommend turning autoswitch off, learning to be aware of what you do and don't have at your disposal, and learning how to flip through your weapons on the fly. That's what everybody else does, at the moment.

I do believe that a kind of "weighted" system is something that we want to implement for 1.0. However, we're working on other... let's say more important things right now. But we know this concern exists, and we'll be attempting to do something about it in the future.

Ok I just DL'ed this program earlier today and I have a problem, everytime I try to load a map just to run around and look at it, I get a Hunk Allocation error, even when I load up the default Q3 maps...  what's the problem?  Seems like it works very well for other people, why not me?  Also It should be noted that basic Quake 3 Arena by itself, even with high poly models and weaponry, runs smooth as silk.

Is there anything at all that can be done to aid my issue of the moment?  I only DL'ed this today because I just got Broadband.

If there is any issue with my computer config,
     Here are the base specs for my quasi antique P.O.S.-
AMD Duron 1.1Ghz Processor
512 SDram
2 Harddrives, a 10 GB and a 20 GB
GeForce FX5200 256DDR Video card
Soundblaster Live 5.1 soundcard
Windows 98SE Operating System

You need to allocate more memory for the game to run. Q3 needs less, so check the manual and it shows you what to do. Easy and only takes 2 minutes.

Once ypu've done this it should run well on your system.

(I'm not an expert, but I'm probubly the only one awake at this time!)

Well I've tried running it both ways...  it crashes either way.  I know I've got the memory for this, I actually can run DooM3 fairly smooth to a point on this antique, so any kind of mod for Quake 3 should not be a problem at all.

Whoa, easy there, we're here to help!  First, let's explore a few things.

What version did you download?  You can check Gen's versions by looking at your list of PK3's.  If you can load to Gen's main console you should see it in the lower right corner.  It should say "beta version 0.99f".  If it says 0.99e, you need to download the .99f patch.  This must be installed over top of .99e.  .99f automatically sets a minimum hunkmegs value of 128 for you, so you should not get a hunkmegs error with .99f.  Setting it higher (if possible) is recommended, but you shouldn't need anything higher than 256.  Some machines also won't respond too well to settings of 256 or higher for some reason.  Mine is one of them.  Others seem to do ok.

If you're "freezing" at any point during the load process, which point is it?  If it's sitting at "awaiting snapshot" it will load into the level, but it'll take an additional minute to do so and will appear to have frozen the computer.  I'd recommend enabling compressed textures if this happens.  I recommend enabling compressed textures no matter what you do.  This solves this problem over 99% of the time, and speeds up performance overall with no loss of visual quality.  Gen takes quite a long time to load all the media if you're running r_picmip 0 (like I do), but you should be able to go from "Awaiting Snapshot" to actual gameplay in just a few seconds with compressed textures enabled.  The media load can take betweeen 15 and 45 seconds, depending on your graphics settings and whether they're optimized for speed or quality.

Last, have you checked the troubleshooting section of the manual?  I wrote that myself, and I'm the lead coder on the project.  I've tried to cover every possible scenario that could cause Gen to not function correctly.  Check it out, try some tweaks, and see if they help.  If not, provide as much information as you can here and I'll do my best to get you up and running.